3M Fibrlok II Universal Optical Fiber Splice 2529

3M Fibrlok II Universal Optical Fiber Splice 2529
2529 3M Fibrlok II Universal Optical Fiber Splice

Singlemode and Multimode 250 µm/900 µm

The 3M™ Fibrlok™ II Universal Optical Fiber Splice 2529 is designed to easily splice any combination of 250 or 900 µm coated fibers with inexpensive tooling and no electrical power.

Fibrlok single fiber optical splices utilize a metallic splicing element held inside a molded plastic body and cap to provide a fast, permanent splice. Index matching gel at the fiber splice interface helps enable a low loss splice that maintains transmission quality over the life of the network. Assembly of the inexpensive Fibrlok splice requires only removal of the fiber coating, cleaning and cleaving of the fiber.

Features:

  • < 0.1 dB typical insertion loss
  • Minimum tooling requirements
  • No epoxy or electricity required
  • Simple, easy to use
  • Ability to reposition fibers
  • Single splice for any combination 250 µm or 900 µm fibers

Benefits:

  • High performance
  • Low capital cost
  • Easy on-site installation
  • Minimal training, lower installed cost
  • Improved splicing yield
  • Reduced inventory
Specifications:
Insertion Loss (dB) typical < 0.1
Reflectance (dB) typical at room temp <-55
Reflectance (dB) over operating temperature range <-35
Operating temperature range (°C) -40°C to 75°C
Storage temperature (°C) -40°C to 75°C