AN5516-06 FiberHome PON OLT

AN5516-06 FiberHome PON OLT

Description:
Fiberhome AN5516 Series Telecom Gigabit Ethernet platform PON end of the equipment, using industry-leading technology, all the front board, the former outlet design, providing high-density XPON disk, support GE / 10GE / STM-1 / E1 on the interface, can be achieved GPON / EPON / 10G PON / P2P intermixing, continuous evolution, effective protection of network construction investment, the use of high-performance chips, green energy, improve network reliability, reduce operation and maintenance costs.

Parameter:
Model No. AN5516-01 AN5516-04 AN5516-06
Dimension: 620*620*440mm 600*430*230mm 550*460*380mm
Operating Environment Temperature: -25℃～+55℃
Humidity:5%~95% (non-condensing)		 Temperature: -40℃～+65℃
Humidity:5%~95% (non-condensing		 Temperature: -40℃～+65℃
Humidity:5%~95% (non-condensing
Power Supply Parameters -48V DC input Supports dual power protection
Working Voltage range  -38.4V～-72V		 -48V DC input Supports dual power protection
Working Voltage range  -38.4V～-72V		 -48V DC input Supports dual power protection
Working Voltage range  -38.4V～-72V Support 220V / 110V AC input
Backplane Exchange capacity 3.2Tbit/s 1.5Tbit/s 720Gbit/s
Control Board Exchange Capacity 1920 Gbit/s 960Gbit/s 512Gbit/s
Access Capacity 128*10G EPON
64*10G GPON
128*EPON
256*GPON
768*GE		 48*10G EPON
24*10G GPON
48*EPON
96*GPON
288*GE		 16*10G EPON
8*10G GPON
16*EPON
32*GPON
96*GE
Access Type Upstream interface: 10GE optical, GE optical/electricity
Business interface: EPON optical port, GPON optical port, 10G EPON optical port, P2P FE optical port, P2P GE optical port, Ethernet optical interface
System Performance Layer 2 / Layer 3 wire-speed forwarding
Support static router /RIP/OSPE.MPLS
BITS/E1/STM-1/Ethernet/1588v2/1PPS+ToD clock
Maximum support 1:256 splitting ratio
Maximum support 60KM logical distance

AN5516-06 Medium OLT (6U)
Compact carrier-level central office equipment

  • Suitable for medium density user scene access
  • Equipment size mm480W / 265H / 230D
  • Total number of slots 10
  • Service slot 6
  • Exchange capacity of 976G
  • Backplane Broadband 1.6T
  • Single frame PON port capacity 96 PON port
  • EPON / GPON / 10G PON / P2P common platform
  • Software and Business Boards are common to AN5516-01

Feature and Application:

  • Super Access Ability
    High capacity and Density carrier-class 10 Gigabit platforms supporting 128 PON ports, switch card capacity of 976 G and backplane bus capacity of 3.52 T.
    Support STM-1/E1 private uplink interface and Maximum up to 16×16GE downlink interfaces.
    It has capability to support split-ratio of 1:32/64/128 long haul transmission and CLASS C+ enabled optical module.
  • Multi-service Access
    Provide Internet, Voice, IPTV, CATV and TDM services.
    Support IEEE 1588v2 protocol and 1PPS+TOD Clock interface.
    Support OSPF, VRRP and RIP L3 protocols.
    Common platform of EPON/GPON/10G PON/P2P for FTTX Smooth evolution.
  • High Reliability Optimization Design
    Standard 19” inches cabinet supporting 2 service slots.
    Full front card and front lines design.
    Support hot plug for all cards and PON modules.
    Support redundancy error-check protection for services, controller and uplink cards.
    End-to-end protection, uplink ports RSTP/LACP protection and downlink PON port millisecond level switch protection.
  • Green Energy
    With high performance and low power consumption chip the overall power consumption is lower than the average industry level 8-level temperature control intelligent fan supporting free ports sleep mode and energy saving.

Details:
1G OLT Configuration: Control Board:HSWA*2
Uplink Board: GU6F*2
Power Board: PWR*2

10G OLT Configuration:Control Board:HSWA*2
Uplink Board: HU1A*2            
Power Board: PWR*2