Drop Cable Protective Sleeves
Description:
Fiber Splice Protective Sleeves are designed to restore mechanical strength, environmental integrity and fiber optic transmission properties after fiber splicing. Drop cable protectives sleeves realize the reinforcement by single or dual stainless steel rod.
Features:
- Customized length available
- Color-coded outer tubes available
- Splice point protection and intensity improvement
- External tube clearly shows the status of fiber joint
- Outer tube in compliance with CHINA YD/T1024-1999
- Completed shrink in compliance with CHINA YD/T1024-1999
- Airproof performance keeps the splice point’s good resitance of humidity and temperature
Material:
| Drop Cable Protective Sleeve | |||
| External Tube | Internal Tube | Reinforcement | |
| Material | XLPO | EVA | 201 or 304 stainless steel Rod |
Dimension:
| Working Temperature | -45~100℃ |
| Shrinking Temperature | 90~110℃ |
| Model | External Tube (mm) | Internal Tube (mm) | Stainless Steel Rod (mm) | |||
| Height and Width after Shrink (D1) | Length (L) | Inner Diameter (D) | Length (L) | Diameter (d) | Length (l) | |
| JTSP(PX)-60mm | 3.5±0.1 | 60±1 | 3.8±0.2 | 60±1 | 1.0±0.05 | 55±1 |
| JTSP(PX)-50mm | 3.5±0.1 | 50±1 | 3.8±0.2 | 50±1 | 1.0±0.05 | 45±1 |
| JTSP(PX)-45mm | 3.5±0.1 | 45±1 | 3.8±0.2 | 45±1 | 1.0±0.05 | 40±1 |
| Model | External Tube (mm) | Internal Tube (mm) | Stainless Steel Rod (mm) | |||
| Height and Width after Shrink (D1) | Length (L) | Inner Diameter (D) | Length (L) | Diameter (d) | Length (l) | |
| JTSP(2PX)-60mm | 3.6±0.1 | 60±1 | 3.7±0.1 | 60±1 | 1.0±0.05 | 55±1 |
| JTSP(2PX)-50mm | 3.6±0.1 | 50±1 | 3.7±0.1 | 50±1 | 1.0±0.05 | 45±1 |
| JTSP(2PX)-45mm | 3.6±0.1 | 45±1 | 3.7±0.1 | 45±1 | 1.0±0.05 | 40±1 |
Related Products:
FTTH Drop Cable Splicing Protective Box
Round shape
Rectangular shape
Description:
FTTH Drop Cable Splicing Protective Box is specially designed for protecting the splicing fibers of FTTH Drop Cables at the dimension of 2.0mm*3.0mm.
FTTH Drop Cables are spliced and protected by the fiber splice protective sleeve. Then put the spliced FTTH Drop Cables and heat shrink fiber splice protective sleeve into FTTH Drop Cable Splicing Protective Box. At last, install FTTH Drop Cable Splicing Protective Box onto the wall or into Optical Distribution Box.
Features:
- Flame retardant
- High anti-aging performance
- Suitable for FTTH Drop Cable 2.0mm*3.0mm
Application:
- FTTH
- Telecommunication
| Model | MAY-DCSPB-O | MAY-DCSPB-E |
| Shape | round | rectangular |
| Size | 12(D)*102(L)mm | 85(L)*18(W)*11(H)mm |
| Color | White | |
| Working Temperature | -25~65℃ | |
| Atmospheric Pressure | 70Kpa-106Kpa | |