ELC925T LC Pre-embedded Fiber Type Field Assembly Optical Connector
0.9mm cable boot
It is easy, fast and reliable for engineers to terminate optical fibers in field by using Field Assembly Optical Connector, without epoxy, polishing, curing, or splicing.
Field assembly optical connector plays an irreplaceable role in FTTH access network. It can achieve similar excellent transmission parameters as standard polishing and splicing technology. It can greatly reduce the assembly time.
The pre-embedded fiber in the ferrule of pre-embedded fiber type field assembly optical connector has already been pre-polished at the patchcord workshop. Just strip, cleave and clean the fiber and then insert the fixed-length fiber and connect with the pre-embedded fiber by index-matching gel.
Installation Charm:
For pre-embedded fiber type field assembly optical connector, the fiber connects with the pre-embedded fiber by index-matching gel. (Figure 1)
Features:
- Low insertion loss and high return loss
- High reliability, and save maintenance cost
- Pre-embedded fiber is polished in high quality
- Can be reusable with easy disassembly and assembly
- Can work stably in harsh environment, like severe coldness and dust, high temperature, high humidity, etc
- Few special installation tools required, installation is simple and fast, with less than 20 seconds averagely; low technical requirements for the operators
Applications:
- Telecommunication networks
- FTTX, FTTH (Fiber to the Home)
- Fiber testing and testing equipment
- FTTH Drop Cable, 86 socket outlet, and ONU
| Connector Length | 45mm |
| Applicable Cable | Φ0.9mm, Φ2.0mm, Φ3.0mm, 1.6×2.0mm and 2.0´3.0mm drop cable |
| Fiber Diameter | 125um |
| Coating Diameter | 250um |
| Fiber Mode | single mode G.657, MM OM3, or MM OM4 |
| Insertion Loss | ≤0.3dB (max. 0.5dB) |
| Return Loss | SM UPC≥45dB, APC≥50dB; MM UPC≥25dB |
| Apex Offset | ≤50um |
| Radius of Curvature | 10～25mm (UPC); 5～15mm (APC) |
| Undercut | -100~50nm |
| Average Assembly Time | Drop Cable: ≤2mins; Round Cable: ≤4mins |
| Success Rate | 95% |
| Lifespan | 10 years |
| Clamping Strength | ≥4N (125um) |
| Tensile Strength | ≥30N (≥5N for Ф0.9mm Round Cable) |
| Assembly Repeatability | ≥3 times (IL≤0.3dB, RL≤5dB) |
| Mechanical Durability | 500 times (IL≤0.3dB, RL≤5dB) |
| Fall Test | 1.5m height, 8 times (IL≤0.3dB, RL≤5dB) |
| High Temperature and Moisture Test | 96h (IL≤0.3dB, RL≤5dB) |
| Temperature Cycle Test | 168h, 21 times, 1 (IL≤0.3dB, RL≤5dB) |
| Relative Humidity | ≤95% (@±30°C) |
| Atmospheric Pressure | 60kpa~160kpa |
| Operating Temperature | -40°C~+85°C |
| Storage Temperature | -40°C~+85°C |