Ultra Soft Fiber Optic Patchcord and Pigtail
Ultra soft fiber optic patchcord and pigtail is with features of 3.0mm LSZH jacket G.657A2 fiber. It is specially designed for FTTH application. After fiber cable is bending, there is no crease on the jacket.
Specifications:
| Mode | SM | |
| Polishing | UPC | APC |
| Insertion Loss | ≤0.3dB | ≤0.3dB |
| Return Loss | ≥50dB | ≥60dB |
| Interchangeability | ≤0.2dB | |
| Salt Spray | ≤0.2dB | |
| Repeatability | ≤0.1dB (1,000 times) | |
| High Temperature | ≤0.2dB (+85°C 168 hours) | |
| Low Temperature | ≤0.2dB (-40°C 168 hours) | |
| Temperature Cycle | ≤0.2dB (-40°C~85 °C 21 cycles 168 hours) | |
| Humidity | ≤0.2dB (95% 75°C 168 hours) | |
| Durability | ≥1,000 matings | |
| Tensile Strength | ≥90N (3.0mm), ≥70N (2.0mm) | |
| Vibration | ≤0.1dB (10-55Hz 1.5mm) | |
| Falling | ≤0.2dB (1.5m high, 8 times) | |
| Operating Temp. | -40°C~+80°C | |
Ordering Information:
| Brand | MAY |
| Name | USPA: Ultra Soft Patchcord USPI: Ultra Soft Pigtail |
| Connector 1 | SU: SC/UPC SA: SC/APC LU: LC/UPC LA: LC/APC FU: FC/UPC FA: FC/APC TU: ST/UPC TA: ST/APC EU: E2000/UPC EA: E2000/APC, etc. |
| Connector 2 | SU: SC/UPC SA: SC/APC LU: LC/UPC LA: LC/APC FU: FC/UPC FA: FC/APC TU: ST/UPC TA: ST/APC EU: E2000/UPC EA: E2000/APC, etc. None: Pigtail |
| Cable Length | 0.5: 0.5m 1: 1m 1.5: 1.5m 2: 2m, etc |
GJFJZY-1B6 (3.0) Ultra Soft Cable
1. Cable Specification:
1.1. Introduction
Simplex cable uses single tight buffer fiber as optical communication medium, the tight buffer fiber wrapped with a layer of aramid yarn as strength member units, and the cable is completed with a LSZH jacket.
1.2. Tight buffer color code
| No. | 1 |
| Color | White |
1.3. Optical fiber type and properties
G.657A2 Characteristics of Optical Fiber
G.657A2 Characteristics of Optical Fiber
| Fiber Type | G.657A2 | |
| Mode field diameter | 1310nm | 8.6±0.4um |
| 1550nm | 9.6±0.5um | |
| Cladding diameter | 124.3~125.0um | |
| Cladding non-circularity | ≤1.0% | |
| Core concentricity error | ≤0.5um | |
| Coating diameter | 245±5um | |
| Coating/cladding concentricity error | ≤10um | |
| Cable cut-off wavelength | ≤1260nm | |
| Attenuation coefficient | 1310nm | ≤0.35dB/km |
| 1550nm | ≤0.21dB/km | |
| Macro-bend loss (1 turn 7.5mm radius) | 1550nm | ≤0.5dB |
| 1625nm | ≤1.0dB | |
| Proof stress level | 100kpsi | |
1.4. Cable structure and parameter
| Tight buffer fiber | Diameter | 0.85±0.05mm |
| Material | PVC | |
| Strength member | Material | Aramid yarn |
| Outer jacket | Diameter | 2.9±0.1mm |
| Material | LSZH | |
| Color | Ivory | |
| Tensile performance | Short term | 600N |
| Long term | 400N | |
| Crush | Short term | 500N/100mm |
| Long term | 100N/100mm | |
| Cable attenuation | ≤0.4dB/km @ 1310nm, ≤0.3dB/km @ 1550nm | |
| Cable weight | About 7kg/km | |
2. Characteristics of optical cable
2.1. Minimum bending radius
2.1. Minimum bending radius
| Static | 10*Dmm |
| Dynamic | 20*Dmm |
2.2. Application temperature range
| Operation | -20~+70°C |
| Installation | -5~+60°C |
| Storage/transportation | -40~+70°C |
2.3. Main mechnical & environmental performance test (single mode fiber)
| Item | Test Method | Acceptance Condition |
| Tensile strength IEC 60794-1-2-E1 | -Load: Short term tension -Length of cable: ≥50m -Load time: 5min | -Loss change≤0.1dB@1550nm after test -No fiber break and no sheath damage |
| -Load: Long term tension -Length of cable: ≥50m -Load time: 5min | -Loss change≤0.1dB@1550nm after test -No fiber break and no sheath damage | |
| Crush Test IEC 60794-1-2-E3 | -Load: Short term crush -Load time: 1min | -Loss change≤0.1dB@1550nm after test -No fiber break and no sheath damage |
| -Load: Short term crush -Load time: 10min | -Loss change≤0.1dB@1550nm after test -No fiber break and no sheath damage | |
| Impact Test IEC 60794-1-2-E4 | -Points of impact: 3 -Times of per point: 1 -Impact energy: 1J | -Loss change≤0.1dB@1550nm after test -No fiber break and no sheath damage |
| Repeated Bending IEC 60794-1-2-E6 | -Bending radius: 20 x OD -No. of cycles: 100 -Load: 20N | -Loss change≤0.1dB@1550nm after test -No fiber break and no sheath damage |
| Torsion IEC 60794-1-2-E7 | -Length: 1m -Twist angle: ±180° -No. of cycles: 10 -Load: 20N | -Loss change≤0.1dB@1550nm after test -No fiber break and no sheath damage |
| Temperature cycling IEC 60794-1-2-F1 | -Temperature: -20~+70°C -Time of each step: 8h -No. of cycles: 2 | -Loss change≤0.4dB@1550nm after test -No fiber break and no sheath damage |
| Kink IEC 60794-1-2-E10 | -Loop diameter: 20 x OD | -No kink occurs |