Uni-tube Non-metallic Non-armored Cable – GYFXTY

Uni-tube Non-metallic Non-armored Cable - GYFXTY

Cable Structure:
The 250um bare fibers are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. Over the tube, water-blocking material is applied to to keep the cable watertight. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides. Then the cable is completed with a polyethylene (PE) sheath.

Fiber Count Cable Diameter (mm) Tensile Strength (N) Crush Resistance (N/100mm) Bending Radius (mm) Cable Weight (kg/km)
Short Term Long Term Short Term Long Term Dynamic Static
2~12 10.0 1,000 400 1,000 300 20D 10D 81

The nominal value of the PE sheath thickness is 1.6mm.

Environmental Properties:
Temperature Range -40°C~+70°C
Transmission Properties:
Fiber Type SM 9/125um (1310nm/1550nm) 62.5um (OM1) (850nm/1300nm) 50um (OM2) (850nm/1300nm) 50um (OM3) (850nm/1300nm)
Maximum Attenuation (dB/km) 0.8/0.6 3.5/1.5 3.5/1.5 3.5/1.5
Typical Attenuation (dB/km) 0.4/0.3 3.5/1.5 3.0/1.0 3.0/1.0
Minimum LED Bandwidth (MHz·km) 200/500 500/500 1500/500


  • Long delivery length
  • Crush resistance and flexibility
  • Two parallel FRPs ensure tensile strength
  • Good mechanical and temperature performance
  • High strength loose tube that is hydrolysis resistant
  • Small diameter, light weight and friendly installation
  • Special tube filling compound ensure a critical protection of fiber


  • YD/T769-2003
  • IEC 60794-1


  • Duct
  • Aerial
Ordering Information:
Brand MAY
Name GYFXTY: Uni-tube Non-metallic Non-armored Cable – GYFXTY
Fiber Count 2: 2 fibers
4: 4 fibers
6: 6 fibers
8: 8 fibers
10: 10 fibers
12: 12 fibers
Fiber Mode SM: SM 9/125um
MM: 50/125um or 62.5/125um
Fiber Type 2D: SM G.652.D
7A1: SM G.657.A1
7A2: SM G.657.A2
7B2: SM G.657.B2
7B3: SM G.657.B3
OM1: MM 62.5/125um
OM2: MM 50/125um
OM3: MM 10G 50/125um
OM4: MM 10G 50/125um
Fiber Length 0.5: 0.5km
1: 1km
1.5: 1.5km
2: 2km; etc