UR Butt Connector, UR Splice Connector
UR Butt Connectors are real time savers. They enable the user to tap into another wire or other two wires without interrupting service. A U-shaped element inside each connector displaces insulation material and makes contact with the copper conductor. UR Butt Connectors also include factory-installed sealant to protect against corrosion and seal out moisture. UR Butt Connectors are fast to install, easy to work with and available in a wide range of common wire gauges. UR Butt Connectors allow direct tapping into existing solid copper conductors without interrupting service. The pre-crimp feature helps hold the wires in place until the connector is crimped and the splice is complete.
UR Butt Connectors are compatible with copper wires of 0.4-0.9mm (19-26 AWG). The gel filled IDC contact area protects connections from moisture penetration.
All materials used in the connectors are non-toxic and dermatologically safe.
Features:
- Wire tap and butt splices for splicing 19-26 AWG cable
- Gel filled IDC contact area provides a moisture resistant barrier for reliable connections
- Packaged in bags of 100 pieces
Application:
- Splicing
- Voice
- Data
- Premise wiring
| Copper Wire Number | Two or three |
| Applicable Wire | telephone copper wire of 0.4mm-0.9mm (19-26 AWG) or copper-clad steel connector with insulation diameters 1.67mm (0.066″), and Cat.5 compliant |
| Gel | yes |
| Operating Temperature | -30 to +70℃ |
| Storage Temperature | -40 to +80℃ |
| Relative Humidity | 0~95% (non-condensing) |