Description: MTRJ stands for Mechanical Transfer Registered Jack. MTRJ connector is a small form factor (SFF) duplex connector with both fibers in a single polymer ferrule. MTRJ Connector uses pins for alignment and has male and female versions.
Features:
Compact Small Form Factor (SFF) allows two fibers to inhabit the space of one fiber
Increases port density required on a computer and networking-related hardware, panels, wall plates, and closets by 50%
Low insertion loss
Meets TIA-568A standards
RJ-45 latching mechanism, press-to-release design for ease-of-use
Applications:
CATV
LAN & WAN
Telecommunication networks
PON (Passive Optical Network)
FTTX, FTTH (Fiber to the Home)
Specifications:
Mode
SM
MM
Polishing
UPC
APC
UPC
Insertion Loss
≤0.3dB
≤0.3dB
≤0.3dB
Return Loss
≥55dB
≥65dB
Operating Wavelength
1310nm, 1550nm
850nm, 1300nm
Ferrule Concentricity
≤1um
≤4um
Interchangeability
≤0.2dB
Salt Spray
≤0.2dB
Repeatability
≤0.1dB (1,000 times)
High Temperature
≤0.2dB (+85°C 168 hours)
Low Temperature
≤0.2dB (-40°C 168 hours)
Temperature Cycle
≤0.2dB (-40°C~85°C 21 cycles 168 hours)
Humidity
≤0.2dB (95% 75°C 168 hours)
Durability
≥1,000 Times
Vibration
≤0.1dB (10-55Hz 1.5mm)
Falling
≤0.2dB (1.5m high, 8 times)
Operating Temp.
-40°C~+85°C
Ordering Information:
Name
Connector
Type
Male MTRJ(with pin); Female MTRJ(no pin)
Polishing Endface
UPC; APC
Fiber Count
Duplex (DX)
Mode
SM; MM
Cable Diameter
2.0mm
Insertion Loss
0.3dB
Assembling Situation
Before Assembling;Half after Assembling
For Example: Connector male MTRJ/UPC, DX, SM, 2.0mm cable, 0.3dB insertion loss, before assembling.