AN5516-04 Fiberhome PON OLT
Description:
Fiberhome AN5516 Series Telecom Gigabit Ethernet platform PON end of the equipment, using industry-leading technology, all the front board, the former outlet design, providing high-density XPON disk, support GE / 10GE / STM-1 / E1 on the interface, can be achieved GPON / EPON / 10G PON / P2P intermixing, continuous evolution, effective protection of network construction investment, the use of high-performance chips, green energy, improve network reliability, reduce operation and maintenance costs.
Model No. | AN5516-01 | AN5516-04 | AN5516-06 |
Dimension: | 620*620*440mm | 600*430*230mm | 550*460*380mm |
Operating Environment | Temperature: -25℃~+55℃
Humidity:5%~95% (non-condensing) |
Temperature: -40℃~+65℃ Humidity:5%~95% (non-condensing |
Temperature: -40℃~+65℃ Humidity:5%~95% (non-condensing |
Power Supply Parameters | -48V DC input Supports dual power protection Working Voltage range -38.4V~-72V |
-48V DC input Supports dual power protection Working Voltage range -38.4V~-72V |
-48V DC input
Supports dual power protection
Working Voltage range -38.4V~-72V Support 220V / 110V AC input |
Backplane Exchange capacity | 3.2Tbit/s | 1.5Tbit/s | 720Gbit/s |
Control Board Exchange Capacity | 1920 Gbit/s | 960Gbit/s | 512Gbit/s |
Access Capacity | 128*10G EPON
64*10G GPON 128*EPON 256*GPON 768*GE |
48*10G EPON
24*10G GPON 48*EPON 96*GPON 288*GE |
16*10G EPON
8*10G GPON 16*EPON 32*GPON 96*GE |
Access Type | Upstream interface: 10GE optical, GE optical/electricity Business interface: EPON optical port, GPON optical port, 10G EPON optical port, P2P FE optical port, P2P GE optical port, Ethernet optical interface |
||
System Performance | Layer 2 / Layer 3 wire-speed forwarding
Support static router /RIP/OSPE.MPLS BITS/E1/STM-1/Ethernet/1588v2/1PPS+ToD clock Maximum support 1:256 splitting ratio Maximum support 60KM logical distance |
AN5516-04 Mini OLT (2U)
Mini-carrier-class equipment
- Suitable for low-density small user scene access
- Equipment size mm480W / 88H / 239D
- Total number of slots 5
- Service slot 2
- Exchange capacity of 488G
- Backplane Broadband 800G
- Single frame PON port capacity 32 PON port
- EPON / GPON / 10G PON / P2P common platform
- Software and Business Boards are common to AN5516-01
Feature and Application:
- Super Access Ability
High capacity and Density carrier-class 10 Gigabit platforms supporting 128 PON ports, switch card capacity of 976 G and backplane bus capacity of 3.52 T.
Support STM-1/E1 private uplink interface and Maximum up to 16×16GE downlink interfaces.
It has capability to support split-ratio of 1:32/64/128 long haul transmission and CLASS C+ enabled optical module. - Multi-service Access
Provide Internet, Voice, IPTV, CATV and TDM services.
Support IEEE 1588v2 protocol and 1PPS+TOD Clock interface.
Support OSPF, VRRP and RIP L3 protocols.
Common platform of EPON/GPON/10G PON/P2P for FTTX Smooth evolution. - High Reliability Optimization Design
Standard 19” inches cabinet supporting 2 service slots.
Full front card and front lines design.
Support hot plug for all cards and PON modules.
Support redundancy error-check protection for services, controller and uplink cards.
End-to-end protection, uplink ports RSTP/LACP protection and downlink PON port millisecond level switch protection. - Green Energy
With high performance and low power consumption chip the overall power consumption is lower than the average industry level 8-level temperature control intelligent fan supporting free ports sleep mode and energy saving
Details:
1G DC OLT Configuration:Control & Uplink Board: HSUC*2
Power Board: PWRD*1
1G AC OLT Configuration:Control&Uplink Board: HSUC*2
Power Board: PWRA*1
10G DC OLT Configuration:Control&Uplink Board: HSUB*2
Power Board: PWRD*1
10G AC OLT Configuration:Control&Uplink Board: HSUB*2
Power Board: PWRA*1