ESC925T-K SC Pre-embedded Fiber Type Field Assembly Optical Connector

ESC925T-K SC UPC Field Assembly Optical Connector

ESC925T-K/UPC

ESC925T-K SC APC Field Assembly Optical Connector

ESC925T-K/APC

It is easy, fast and reliable for engineers to terminate optical fibers in field by using Field Assembly Optical Connector, without epoxy, polishing, curing, or splicing.

Field assembly optical connector plays an irreplaceable role in FTTH access network. It can achieve similar excellent transmission parameters as standard polishing and splicing technology. It can greatly reduce the assembly time.

The pre-embedded fiber in the ferrule of pre-embedded fiber type field assembly optical connector has already been pre-polished at the patchcord workshop. Just strip, cleave and clean the fiber and then insert the fixed-length fiber and connect with the pre-embedded fiber by index-matching gel.

Installation Charm:
For pre-embedded fiber type field assembly optical connector, the fiber connects with the pre-embedded fiber by index-matching gel. (Figure 1)

Field Assembly Optical Connector Installation Charm

Features:

  • Low insertion loss and high return loss
  • High reliability, and save maintenance cost
  • Pre-embedded fiber is polished in high quality
  • Can be reusable with easy disassembly and assembly
  • Can work stably in harsh environment, like severe coldness and dust, high temperature, high humidity, etc
  • Few special installation tools required, installation is simple and fast, with less than 20 seconds averagely; low technical requirements for the operators

Applications:

  • Telecommunication networks
  • FTTX, FTTH (Fiber to the Home)
  • Fiber testing and testing equipment
  • FTTH Drop Cable, 86 socket outlet, and ONU 
Specifications:
Connector Length 66mm, including boot (53.5mm, excluding boot)
Applicable Cable Φ0.9mm, Φ2.0mm, Φ3.0mm, 1.6×2.0mm and 2.0´3.0mm drop cable
Fiber Diameter 125um
Coating Diameter 250um
Fiber Mode single mode G.657
Insertion Loss AVG. ≤0.3dB (max. 0.5dB)
Return Loss SM UPC≥45dB, APC≥50dB
Apex Offset ≤50um
Radius of Curvature 10～25mm (UPC); 5～15mm (APC)
Undercut -100~50nm
Average Assembly Time Drop Cable: ≤2mins; Round Cable: ≤4mins
Success Rate 95%
Lifespan 10 years
Clamping Strength ≥4N (125um)
Tensile Strength ≥30N (≥5N for Ф0.9mm Round Cable)
Assembly Repeatability ≥3 times (IL≤0.3dB, RL≤5dB)
Mechanical Durability 500 times (IL≤0.3dB, RL≤5dB)
Fall Test 1.5m height, 8 times (IL≤0.3dB, RL≤5dB)
High Temperature and Moisture Test 96h (IL≤0.3dB, RL≤5dB)
Temperature Cycle Test 168h, 21 times, 1 (IL≤0.3dB, RL≤5dB)
Relative Humidity ≤95% (@±30°C)
Atmospheric Pressure 60kpa~160kpa
Operating Temperature -25°C~+75°C
Storage Temperature -40°C~+85°C

Download:
1. Manual