FDH-480 480 Fibers Fiber Distribution Hub
Description:
Fiber Distribution Hub (FDH) Cabinet provides a reliable, lightweight and cost-effective solution for connecting feeder cables and distribution cables through rack mounted fiber optic splitters in the outside plant of FTTH network. Fiber Distribution Hub (FDH) Cabinet is deployed as Local Convergence Point (LCP) in a centralized splitting PON system and a testing point in the outside plant of FTTH network.
Fiber Distribution Hub (FDH) Cabinet is made of outer cabinet wall with stainless steel and inner cabinet wall with aluminium alloy. Between the outer and inner cabinet, there’s a heat insulation (thickness of 18mm), which is made of high temperature resistant, low heat transmit foam material to prevent heat, burn and shake.
In the places where top/bottom/door board and Fiber Distribution Hub (FDH) Cabinet meet, the high temperature resistant foam sealing putty is used to prevent dust, water and moist.
Fiber Distribution Hub (FDH) Cabinet Structure:
The interior of Fiber Distribution Hub (FDH) Cabinet consists of the following primary components:
1. Swing Frames : Provide a positionfor splicing trays. Each frame can provides mounting spaces for 19 splicing trays. Each splicing tray can provides 12 positions for connectors .The Fiber Distribution Hub (FDH) Cabinet may be equipped with up to 38 splicing trays. SC/UPC or SC/APC style connectors are available.
2. Grounding System – Provides a point for grounding theFiber Distribution Hub (FDH) Cabinet.
3. The exterior of theFiber Distribution Hub (FDH) Cabinet is constructed of heavy stainless steel and is coated with an grey-colored finish. Each Fiber Distribution Hub (FDH) Cabinet is equipped with two front doors that provide full front access to the optical components.
4. Pedestal: The pedestal-mount Fiber Distribution Hub (FDH) Cabinetmay be mounted on a concrete pad Mounting kits (accessories) are available for each mounting option.
| Dimension (H×W×D) | 1310×1190×414mm |
| Material | Aluminum alloy (inner layer) and stainless steel(outer layer) |
| Capacity | 2*32 splitter |
| Installation Space | 38U |
| Protection Level | IP56 |
| Splitter panel: | |
| Dimension (W×D×H) | 482×200×1Umm |
| Material | aluminum and power coated |
| Installation Method | 19” rack |
| Capacity | 1pc of 2*32 splitter |
| 24F Fiber Uni-rack: | |
| Dimension (W×D×H) | 482×200×1U (mm) |
| Material | aluminum and power coated |
| Installation Method | 19” rack |
| Capacity | 24 fibers |