MAY400E MINI PRO Multi-functional OTDR integrates OTDR, OPM, VFL, Laser Source, Loss Test and RJ45 Sequence in one unit. It is a powerful and economic tester for installers of fiber cable and network cable.
Features:
Integrated design, smart and rugged
FC/SC/ST connectors interchangeable
Automatic and manual test function
Visual Fault Locator (VFL) function
OTDR Viewer software for data analysis
Applications:
CATV network testing
Access network testing
LAN network testing
Laband Factory testing
FTTA troubleshooting
Multi-functions: 1. OTDR 2. Optical Power Meter (OPM) 3. Visual Fault Locator (VFL) Visual Fault Locator uses red laser of 650nm to locate broken fiber point and test fiber continuity. 4. Optical Laser Source (Laser) 5. Loss Test OPM and OLS can be opened at the same time to test insertion loss. 6. RJ45 Sequence (RJ45 Seq.) It can check wire map of RJ45 cable. 7. Flashlight 8. Report Print PC software helps print out OTDR test reports.
Note: ①Testing temperature is 25°C±2°C, maximum pulse width, average time is more than 3 minutes. ②Test conditions of Event Dead Zone are minimum range, minimum pulse width, reflection loss of optical fiber end surface (>45dB), typical value.
2. Optical Power Meter
Wavelength Range
800~1700nm
Calibrated Wavelength
850/1270/1300/1310/1490/1550/1577/1625nm
Test Range
-50~+26dBm
Resolution
0.01dB
Uncertainty
±5%
Frequency Identification
CW/270Hz/1kHz/2kHz
Connector
Universal 2.5mm (FC/SC/ST)
3. Optical Light Source
Emitter Type
FP-LD
Working Wavelength
1310/1550nm±20nm
Output Power
≥-5dBm
Modulation Frequency
CW/270Hz/1kHz/2kHz
Accuracy
CW, ±0.5dB/15min (Test after 15 minutes of preheating)
Connector
FC (Interchangeable SC adapter)
Note: 3.1. The wavelength of Optical Light Source is the same as OTDR wavelength. 3.2. Optical Light Source shares the same fiber port as OTDR port.