Reducer Connector
Description:
It’s a push -pull type, transparent connector. Connecting micro-tube with different outer diameters, allowing microfinance to pass without any resistance. Pressure resistant and can be sealed with gas. The transparent shell design can directly observe the passage of the microfinance. IP68 waterproof level.
Features:
- Connect two micro-ducts which are differentouter diameter
- Internal cone hole to prevent fiber hang up
- Easy installation, without any special tools
- Transparent plastics body, easy to observe the situation
- High temperature resistance -40℃～65℃
- Standard EN50411-2-8
Specifications:
| Specification | Duct OD/ID(mm) | Taper Hole(mm) | Pressure Resistance | |
| BRE5-3/2.1 | 5/3.5 | 3/2.1 | 3.5>2.1 | 25bar |
| BRE7-5/3.5 | 7/5.5 | 5/3.5 | 5.5>3.5 | 25bar |
| BRE8-5/3.5 | 8/6 | 5/3.5 | 6>3.5 | 25bar |
| BRE8-7/3.5 | 8/6 | 7/3.5 | 6>3.5 | 25bar |
| BRE10-5/3.5 | 10/8 | 5/3.5 | 8>3.5 | 25bar |
| BRE10-7/5.5 | 10/8 | 7/5.5 | 8>5.5 | 25bar |
| BRE10-8/6 | 10/8 | 8/6 | 8>6 | 25bar |
| BRE12-5/3.5 | 12/10 | 5/3.5 | 10>3.5 | 25bar |
| BRE12-7/3.5 | 12/10 | 7/3.5 | 10>3.5 | 25bar |
| BRE12-8/6 | 12/10 | 8/6 | 10>6 | 25bar |
| BRE12-10/8 | 12/10 | 10/8 | 10>8 | 25bar |
| BRE14-7/3.5 | 14/12 | 7/3.5 | 12>3.5 | 25bar |
| BRE14-10/8 | 14/12 | 10/8 | 12>8 | 25bar |
| BRE14-12/10 | 14/12 | 12/10 | 12>10 | 25bar |
| BRE16-10/8 | 16/13 | 10/8 | 13>8 | 25bar |
| BRE16-12/10 | 16/13 | 12/10 | 13>10 | 25bar |
| BRE16-14/10 | 16/13 | 14/10 | 13>10 | 25bar |
| BRE18-14/10 | 18/14 | 14/10 | 14>10 | 25bar |