UR2 Butt Connector, UR2 Splice Connector

UR2 Butt Connector UR2 Splice Connector
3M Scotchlok Butt Connector UR2

UR2 Butt Connectors are real time savers. They enable the user to tap into another wire or other two wires without interrupting service. A U-shaped element inside each connector displaces insulation material and makes contact with the copper conductor. UR2 Butt Connectors also include factory-installed sealant to protect against corrosion and seal out moisture. UR2 Butt Connectors are fast to install, easy to work with and available in a wide range of common wire gauges. UR2 Butt Connectors allow direct tapping into existing solid copper conductors without interrupting service. The pre-crimp feature helps hold the wires in place until the connector is crimped and the splice is complete.

UR2 Butt Connectors are compatible with copper wires of 0.4-0.9mm (19-26 AWG). The gel filled IDC contact area protects connections from moisture penetration.

All materials used in the connectors are non-toxic and dermatologically safe.

Features:

  • Wire tap and butt splices for splicing 19-26 AWG cable
  • Gel filled IDC contact area provides a moisture resistant barrier for reliable connections
  • Packaged in bags of 100 pieces

Application:

  • Splicing
  • Voice
  • Data
  • Premise wiring
Specification:
Copper Wire Number Two or three
Applicable Wire telephone copper wire of 0.4mm-0.9mm (19-26 AWG) or copper-clad steel connector with insulation diameters 2.08mm (0.082″), and Cat.5 compliant
Gel yes
Operating Temperature -30 to +70℃
Storage Temperature -40 to +80℃
Relative Humidity 0~95% (non-condensing)