FHP3P01 PON Power Meter with 1310/1490/1550nm, FC and SC Adapters, Rechargeable NiMH Batteries

$184.00$196.00

SKU: N/A Category:

Description:
As the industry’s advanced PON-specific power meter, FHP3P01 PON Power Meter is the flagship of Grandway’s line of testing instruments specifically intended for FTTH and FTTP systems. It is the ideal tool for FTTH/FTTP service activation and troubleshooting.

Service Activation Testing:
Optimizing network reliability requires that all PON signals be measured all the way through service activation to ensure they meet established standards. FHP3P01 offers the features to address this need:

  1. Pass-through connection for ONT signal measurement and simultaneous measurement of all PON signals.
  2. Filtered detectors for individualmeasurement of each wavelength.
  3. Upstream burst detection at 1310nm.

Troubleshooting Testing:
Throughout the maintenance phase, various transmission problems, like fiber cuts, damaged/dirty connectors, macro bending, optical transmitter failure, etc. may ultimately cause signal loss or degradation. Benefit from FHP3P01 troubleshooting functionalities:

  1. Quick,on-site test and measurement of PON signals, anywhere on the network.
  2. Fault identification and isolation.

Features: 

  1. Hand-held and battery operated
  2. FTF LCD Display with high resolution
  3. Filtered measurements with distinct power display
  4. Simultaneous measurement and display power lever of 1310,1490,1550nm WL
  5. Pass/fail function available.Up to10 user defined threshold
  6. Ability to upgrade software through USB interface
  7. 1000 sets data storage
  8. Software to generate TestReport

Specification:

Measurement Range 1310nm 1490nm 1550nm
Sensor Type InGaAs
Isolation Rate >40@1490nm >40@1310nm >40@1310nm
>40@1550nm >30@1550nm >30@1490nm
Measuring Range -40~+10dBm -50~+15dBm -50~+20dBm
Spectral Passband 1260nm~1360nm 1480nm~1500nm 1539~1565nm
Insertion Loss <1.5dB
Accuracy ±0.5dB
Linearity ±0.2dB
Data Storage 1,000 sets
Display 2.8 inch TFT LCD
Refresh Rate of Display 2.5Hz
Threshold 10 sets (configured via PC-based software)
Auto Power-off Yes
Number of Ports 2 (1 for ONU, 1 for OLT & video)
Communication Port USB port
Operating Temperature -10 to +50°C
Relative Humidity 0%~95%, non-condensing
Power Supply 4*Ni-MH AA batteries
External Power Supply 12V AC/DC adapter
Battery Life >20 hours
Dimension 190mm*105mm*55mm(L*W*H)
Net Weight 700g

Standard Accessories:
2*FC adapters, 2*SC adapters, 3*ceramic sleeves, 4*Ni-MH AA batteries, power adapter, USB cable, test report, carrying bag, user manual

 

Weight 2.5 kg
Dimensions 26 × 18 × 17 cm
Optical Port:

UPC, APC

Reviews

There are no reviews yet.

Be the first to review “FHP3P01 PON Power Meter with 1310/1490/1550nm, FC and SC Adapters, Rechargeable NiMH Batteries”

Your email address will not be published. Required fields are marked *